I'm a Facilities Manager

Q. I have seen these types of products before…they don’t work. What’s so different about your M2G and M3G technologies?

A. M2G and M3G, have on board intelligence to establish the best load optimisation. The system measures the required load conditions from the temperature sensors every second to calculate the boiler or air conditioning systems “true load”. The M2G and M3G will use then only allow the boiler or air conditioning system to operate to meet the "true load". Therefore significantly reducing wasted energy that does not directly contribute to the building comfort levels.

Q. I’m worried if I fit your technology ambient room and hot water temperatures will not be maintained?

A. M2G always maintains the boiler thermostat / set point, the M2G cannot invoke the “save” strategies until the boiler has reached the required temperature and heating and hot water levels are not put at risk.

Q. We have a Building Management System (BMS) that already does exactly what your M2G and M3G technologies claim to do.

A. M2G and M3G have specifically been designed to control the boiler/burner and air conditioning units from patented control algorithms. BMS systems typically do not have these control strategies. BMS will typically enable /disable the boiler based on a heating/return required temperature or at best from a weather compensation heating curve.